1×2 Fiber PLC Splitter, ABS Box Type, Singlemode
Planar
lightwave circuit (PLC) splitter is a type of optical power management
device that is fabricated using silica optical waveguide technology to
distribute optical signals from Central Office (CO) to multiple premise
locations.
Pigtailed ABS splitter is most commonly used in the
PON networks. It provides the complete protection for inner optical
components and cable, as well as designed for the convenient and
reliable installation, but its volume is relatively large. It's mainly
used for various connection and distribution products.
| Configuration Type: 1× 2, SC/APC connector | Optical Signal Distribution |
| 900μm ITU G.657A1 for fiber input/output | Data Communications |
| Low insertion loss ≤ 4.2dB | Lan and CATV System |
| Low polarization dependent loss (PDL) ≤ 0.2dB | FTTX Deployment |
| Operating bandwidth: 1260 - 1650nm | FTTH Network |
| Compact design, suitable for installation in optical equipments | Passive Optical Networks (PON) |
| Wide Operating Temperature: -40 - 85°C, support industry standard applications | Measuring System and Laser System |
| High reliability and stability, Telecordia GR-1221/1209 compliant | DWDM and CWDM Systems |
Telcordia 1209 & 1221 Test Results
Name of the test | Condition | Duration |
Temperature- Humidity aging | 85°C and 85% RH | 7 days |
Vibration | 10 - 55Hz, 1.52mm double amplitude, in three axes | 1 hour |
Component Impact | Test Impact of 500g (mass ≤ 0.125kg), 1ms , half sine pulse | 2 impacts |
Temperature Cycling Test | -40 - 70°C, Ramp rate: 1°C /min, Dwell time > 15min | 10 cycles |
Temperature- Humidity cycling | -40 - 85°C , between 10°C and 23°C - 85% RH, at 85°C - 20%RH,
between °C and 85°C - maintain a linear change in RH,
below 10°C - uncontrolled RH | 14 days |
Water Immersion | 43 ± 2°C , PH 5.5 ± 0.5 | 7 days |
Fiber Side Pull test | 0.23 kg load, 90° angle , 2 directions | 5 seconds |
Fiber Side Pull test | 0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs | 5 seconds |
Compact design, suitable for installation in outdoor fiber distribution box
The
ABS PLC splitter supports the protection for inner componnents, it is
suitable for reliable installation in your system design and
manufacturing. Many of our OEM customers in the FTTH, FTTX, PON, GOPN
prefer to use the ABS PLC splitter together with outdoor fiber
distribution box.
Mechanical Drawing
Dimension: 100(L) × 80 (W) × 10(H) mm 
Provides whole series of 1×N and 2×N splitter products that are tailored for specific applications
Standard configurations include 1×4, 1×8, 1×16, 1×32 and 1×64 configurations, as well as custom 2xN configurations.
We
offer them as plain devices with or without connectors but as well
packaged according to your specific needs in 1RU 19” chassis, standard
LGX cassettes, splice pigtailed ABS modules, etc.
